Pneumatic Impact Vibrators

Dimensions and Data sheet

Based on our years of experience and data collection, we have prepared an adjoining table to help decide model and number of vibrator to be used for bin discharge application assuming a dry, not too fine or coarse material of medium flow characteristic and not a heavily stiffened bin.
An appropriate correction may be applied considering deviations found in actual conditions. We at "Sinex" are at your disposal and offer our services for this purpose. Please furnish following and other relevant information.
– Material data and its flow characteristics
– Dimensioned sketch of vessel stating wall thickness & stiffener details and illustrating flow problem encountered.
– Flow required, i.e. continuous or intermittant, manual or auto controlled and with or without synchronizing to someevent in parent equipment.

Wall thickness in mm	Bin dia./ diagonal in mm	Activated Matl. Wt. in Kg.s	Recommended Qty & Model			Remarks
			01	02	03
2	450 560 700	20 40 80	21			Consider using Pneumatic Ball vibrator turbine vibrator or Roller vibrators.
3.2	630 800 1000	60 120 225	21 22 23	21 22	21
5	900 1100  1400	160 300 600	22 23 24	22 22 23	21 22
6.3	1250 1600 2000	450 900 1800	23 24 25	23 23 24	22 23	Impact vibrators OK  for hoppers to gather  Materials dropping / precipitating.  For storage bins with  Difficult materials use motor vibrators,
8	1800 2250 2800	1250 2500 4500	24 25	24 24 25	23 24
10	2500 3200	3500 1000		25	24 25

Pneumatic Vibrator Mounting